Wall wallpaper is one of the favorite wall finishing material choices. One reason is the variation in patterns, colors, and types that are very diverse. In addition, how to install wallpaper is also relatively easy and practical.
Although how to install wallpaper is practical, there are still many who choose renovation or construction services because they are unsure of the end result if they do it themselves. In fact, the cost of renovating a house can swell if a small case still requires the help of a handyman.
To be more efficient, just follow the complete guide on the series of ways to install the following wall wallpaper.
Calculate material requirements and prepare tools
Before carrying out a series of ways to install wallpaper, prepare any material and tools needed. Choose a wallpaper pattern and at the very least, prepare glue and carpentry tools such as stairs, plastic pads, cutters, pencils, rulers, gauges or gauges, weights complete with yarn, handyman buckets for glue, sponges, brushes for glue, and rollers.
In order for the implementation of how to install wallpaper to run smoothly, make sure you have measured the area of the wall that you want to install the wallpaper so that you can determine the exact number and dimensions of the wallpaper.
Clean the wall surface
Don’t forget to clean the wall before doing a series of ways to install wallpaper! In fact, a clean wall will ensure the wallpaper sticks firmly and correctly.
In addition to ensuring that the wall does not seep, patch holes or scratches so that the wall flat. Remove all dust and dirt, then wait for the wall to dry before continuing to install wallpaper.
Adjust the position of the wallpaper with help lines
For easy adjusting the position of the wallpaper when running how to install wallpaper walls, make the help line from top to bottom so that the wallpaper is installed neatly and straightly. Take advantage of threads and weights that are hung from the top to draw a straight line with a pencil.
Start to stick to wallpaper
Time to carry out how to install wallpaper! For the first sheet, cut the wallpaper to the height according to the wall height. Spread out on the floor that has been covered with a base and start the glue brush on the back side of the wallpaper.
Allow the glue for a few moments before continuing to install wallpaper. Generally, the wallpaper will be installed from the bottom up so that the rest of the wallpaper will be on top and not be too visible.
Make sure there are no air bubbles when running how to install wallpaper. Press the wallpaper to the wall with a ruler to make it really tight and flatten the wallpaper when it is stuck to the roller.
Fit the wallpaper when pasted
Special wall wallpaper patterns need to pay attention to accuracy when running how to install wallpaper. Adjust the second sheet to the pattern of the first sheet so it looks together.
Apply the glue evenly next to the first sheet, then continue to install the wall wallpaper as you did for the first sheet until the wall is full.
Finishing and final checking
After all the wallpaper is stuck, the last step in how to install the wallpaper itself is to clean the surface of the wallpaper from the remnants of glue. Wipe the surface of the wallpaper with a damp sponge.
Check the wall for air bubbles, and use the roller again to remove air bubbles. Even though you have followed the series of ways to install the wall wallpaper carefully, also check that each end of the wallpaper is properly attached.
How to install your own wallpaper for the interior of the room is not too difficult, right? Although it requires precision and caution, it is possible to apply the wallpaper to your own room without the help of a handyman, you know. Good luck how to install your own wallpaper at home!